CERN Accélérateur de science

SPS and CNGS

Derniers ajouts:
2025-11-01
06:05
Batch spacing optimization by reinforcement learning / Remta, Matthias (CERN) ; Velotti, Francesco (CERN) ; Rezagholi, Sharwin (Unlisted, AT)
Beams designated for the LHC are injected into the SPS in multiple batches. Given the tight spacing of 200 ns between these batches, the injection kickers have to be precisely synchronized with the injected beam to minimize injection oscillations. [...]
2025 - 13 p. - Published in : Phys. Rev. Accel. Beams 28 (2025) 094603 Fulltext: PDF;

Notice détaillée
2025-10-22
06:39
Monitoring particle accelerators with wireless IoT / Sierra, Rodrigo (CERN) ; Cosmed, Xoán (CERN) ; Danzeca, Salvatore (CERN)
Deployment of a private LoRaWAN® network at CERN started in 2019 to complement the sitewide Wi-Fi network and to meet a demand from our community of technologically advanced users. In addition to indoor coverage in our many buildings, we also provide coverage over around 60 km2 of the surrounding area via outdoor gateways strategically positioned within the campus. [...]
2025 - 4 p. - Published in : EPJ Web Conf. 337 (2025) 01303 Fulltext: PDF;
In : 27th International Conference on Computing in High Energy & Nuclear Physics (CHEP2024), Kraków, Poland, 19 - 25 Oct 2024, pp.01303

Notice détaillée
2025-10-21
10:12
Technical specification. Plug-in supports : Call for tenders I-4078-SPS-EA / Author not quoted
CERN-SPS-SME-ME-RC-hg-76-594.- Geneva : CERN, 1976 - 6 p. Specification

Notice détaillée
2025-10-17
16:38
Design Comparison of Four-Layer Full-Nb$_{3}$Sn and Hybrid Nb$_{3}$Sn/NbTi Cos-Theta Dipoles for the CERN High Field Magnet R&D Programme / Musenich, R (INFN, Genoa) ; Novelli, D (U. Rome La Sapienza (main) ; INFN, Genoa) ; Pampaloni, A (INFN, Genoa) ; Prioli, M (INFN, Milan) ; Rossi, L (Milan U. ; INFN, Milan) ; Sala, N (CERN) ; Santini, C (INFN, Milan) ; Sorbi, M (Milan U. ; INFN, Milan) ; Sorti, S (Milan U. ; INFN, Milan) ; Spadotto, M (INFN, Milan ; Milan Polytechnic) et al.
The High Field Magnet (HFM) R&D; programme at CERN aims to find technological solutions for the construction of accelerator magnets to be installed in future post-LHC colliders. The Italian Institute for Nuclear Physics (INFN) and CERN are collaborating to design and fabricate a new four-layer cos-theta dipole able to achieve a bore field of 14T with at least 20% margin on the load-line. [...]
2026 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 36 (2026) 1-5 Fulltext: PDF; External link: Fulltext

Notice détaillée
2025-10-14
16:01
Technical specification: steel shielding blocks type 1682 and 1684 : Technical questionnaire / Author not quoted
CERN-SPS-EMA-Spec-80-16.- Geneva : CERN, 1980 - 2 p. Specification

Notice détaillée
2025-10-14
15:59
Technical specification: excitation unit for magnetized shielding / Author not quoted
CERN-SPS-EMA-Spec-80-15.- Geneva : CERN, 1980 - 2 p. Specification

Notice détaillée
2025-10-14
15:54
Spécification technique: Système de câblage mobile de l'expérience UA2 : Addendum / Author not quoted
CERN-SPS-EPI-Spec-79-24-Add.- Geneva : CERN, 1980 - 3 p. Specification

Notice détaillée
2025-10-14
15:36
Technical specification: UA2 toroidal field magnets : Technical questionnaire / Author not quoted
CERN-SPS-EMA-Spec-79-12.- Geneva : CERN, 1979 - 16 p. Specification

Notice détaillée
2025-10-14
15:31
Technical specification: UA2 large angle magnetic spectrometer : Technical questionnaire / Author not quoted
CERN-SPS-EMA-Spec-79-11.- Geneva : CERN, 1979 - 13 p. Specification

Notice détaillée
2025-10-14
15:16
Technical specification: manifolds for bending magnets type B190 and B340 : Technical questionnaire / Author not quoted
CERN-SPS-EMA-Spec-79-5.- Geneva : CERN, 1979 - 34 p. Specification

Notice détaillée
Focaliser sur:
High Intensity ECN3 and the SPS Beam Dump Facility (8)
North Area Consolidation Project (0)